Searching for Jeweler Pitch information? Follow the links below to find all the information you need and more.
https://www.ganoksin.com/article/goldsmithing-pitch-options/
Pitch is used all over the world by goldsmiths and silversmiths to hold metal in place while working it with hammers, punches or chisels. It should be hard enough to …
https://repoussetools.com/pitch.htm
For steel or relatively thick (greater than 16 ga.) non-ferrous metal, you want the pitch to be stiffer than you would for softer or thinner metals. The stiffer the pitch is, the sharper the detail you can get, because it doesn't distribute the force of the punch as much as softer pitch does.
https://www.amazon.com/German-Red-Pitch-1-lb/dp/B01F9AYRZE
Premium Quality German Red Pitch for Jewelry Making About our Best Quality Red German Pitch German red pitch is preferred over other choices as it is less brittle, yields better results and has a much greater plasticity at lower temperatures (even at room temperature). If the pitch …4.9/5(14)
https://www.ganoksin.com/article/pitch-bowls-and-alternatives-for-jewelers/
Various pitch types and hardnesses are available from most tool suppliers. My favorite is a red chasing pitch from Germany. It is fairly soft, heats smoothly and is pliable at a low temperature (which avoids burnt fingers). Allcraft in New York carries it.
https://chaserspitch.wordpress.com/tag/jewelers-pitch/
It means the pieces often come away almost clean. Small traces of this pitch can be removed with mineral oil. We love it and recommend it to everyone. “ Sarah Gascoigne – Independent Metalsmith & Designer Jeweler and Instructor at Pratt Fine Arts Center, Seattle WA “Debra your pitch …
We hope that you have found all the necessary information about Jeweler Pitch using the links above.
